TA SERIES 2 Channel Amplifier

The TA series professional amplifier using special circuit design techniques, focusing on the stability of the products in the long-term continuous full power conditions, the main components of the PCB board using SMT technology manufacturing, and circuit layout design through computer simulation system, so that the amplifier has a very high signal to noise ratio and anti-jamming capability. The TA series with higher damping and perfect filtering system, so that high frequency is more delicate and softer, low frequency is more flexible.

Category:

Description

SPECIFICATIONS

 MODEL TA2.2 TA4.2 TA7.2 TA9.2 TA11.2 TA14.2
(EIA 1KHZ 1% THD) STEREO POWER  8 ohms 2×205W 2×400W 2×650W 2×900W 2×1050W 2×1380W
STEREO POWER  4 ohms 2×298W 2×600W 2×980W 2×1350W 2×1700W 2×2288W
BRIDGE POWER 8 ohms NG 1200W 1960W 2700W 3400W 4576W
FREQUENCY RESPONSE 20Hz-20kHz, -0.5dB 20Hz-20kHz, -0.5dB 20Hz-20kHz, ±1dB 20Hz-20kHz, ±1dB 20Hz-20kHz, -0.5dB 20Hz-20kHz, -0.5dB
INPUT SENSITIVITY 1V 0.77V 0.77V 0.77V 0.77V 0.77V
SIGNAL TO NOISE ≥95dB ≥95dB ≥98dB ≥98dB ≥95dB ≥95dB
THD ≤0.03% ≤0.03% ≤0.05% ≤0.05% ≤0.03% ≤0.03%
(8 ohm 1KHz) 65 dB >70 dB 62 dB 62 dB >70 dB >70 dB
CROSSTALK
 (5Hz-1KHz) 200 >240 >280 >280 >240 >240
DAMPING FACTOR
SLEW RATE 13V/μs 15V/μs 15V/μs 15V/μs 15V/μs 15V/μs
PROTECTION FUNCTION SOFT START  / OVERHEATING / OVERCURRENT / DIRECT CURRENT / RADIO FREQUENCY
MAIN POWER SUPPLY AC:220-230V~50Hz/60Hz
DIMENSIONS(W×D×H)mm 482x194x88 482x435x88 482×472.5×88 482x487x 88 482×509 x132
NET WEIGHT 6.7 Kg 12.3Kg 15.2Kg 16.5Kg 26.7 Kg 34.7 Kg

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.